Shop
OXVA XLIM Pro Pod Kit
£24.99
Features:
- 5-30W Wattage Range
- 1000mAh Built-In Battery
- Smart Output Mode
- Variable Wattage Mode
- Button Or Inhale Activation
- 2ml Top Filling Pods
- Adjustable Airflow Toggle
- OXVA Xlim Pod Compatible
Description
The OXVA Xlim Pro pod vape kit is an upgraded version of the popular OXVA Xlim kit, featuring a larger capacity 1000mAh battery and a higher 30W max wattage output. The Xlim Pro can deliver both MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vapes and can last all day on one charge. Inside the box you’ll find two pods, each with a different resistance, so you can try them both to find your favourite.
Features:
- 5-30W Wattage Range
- 1000mAh Built-In Battery
- Smart Output Mode
- Variable Wattage Mode
- Button Or Inhale Activation
- 2ml Top Filling Pods
- Adjustable Airflow Toggle
- OXVA Xlim Pod Compatible
It’s easy to get started with the OXVA Xlim Pro. Insert a filled pod into the device and it will automatically output at the best wattage level for your chosen resistance, so there are no menus or settings to worry about. You can choose between inhale or button activation depending on your preferred vaping style, you can also use the button to manually set a power level. Adjust the airflow using a toggle on the side of the device for customised vapour production and recharge the battery using the included USB-C cable.
To fill an OXVA Xlim Top Filling pod, just open up the rubber stopper on the top of the mouthpiece to access the fill port. The top filling design means you don’t even need to take the pod out of the device to refill it. The Xlim Pro is also compatible with side-filling Xlim V2 pods. Two different pod resistances are included with the kit – the 0.8 Ohm pod provides a more restricted sensation, while the 0.6 Ohm pod delivers an airier vape. We recommend pairing these pods with e-liquid that has a 50% VG concentration.
Contains:
- OXVA Xlim Pro Device
- OXVA Xlim Top Filling 0.6 Ohm Pod
- OXVA Xlim Top Filling 0.8 Ohm Pod
- USB-C Cable
- User Manual
- Lanyard
How To Set Up & Use Your OXVA Xlim Pro Kit
Charge Your Xlim Pro Kit
Your kit includes a USB-C charging cable and it’s a good idea to make sure your kit is fully charged. This will take around half an hour.
Remove The Xlim Pro Pod
Remove the XLIM pod from your device to get it ready for filling. You won’t need any tools to do this as the pod is held in by magnets.
Fill Up The Xlim Pod
To refill your pod, locate and pull out the rubber bung on the side of the pod. This will reveal the filling port.
Reassemble Your Xlim Pro Kit
Reinsert the rubber bung into the pod when you’re done with filling. Then put the pod back into your device.
Prime Your Xlim Coil
With your kit fully reassembled, leave it standing upright for ten minutes. This gives your e-liquid time to soak into and prime the coil.
Unlock And Vape
Unlock your kit by pressing the power button five times, then inhale on the mouthpiece or press the button to start vaping.
